Trending Products
MGH Welding Kit
If you've spent much time behind a wire feed torch, you've undoubtedly witnessed your expensive MIG gun fly off the table with unreasonable speed at least once. Stop the flop with our CNA Fabrication torch holder. This weld-it-yourself kit is great welding practice, and a lot of fun. Once built, it becomes one of the handiest tools in your shop.
8x170 to 8x6.5 Drill Template
Are you swapping in a Ford Dana 60 with the 8x170 bolt pattern but already have an 8x6.5 rear axle? Well, here's your easy solution!
Offroad Parts
JD Coolant Catch
The perfect touch for that vehicle you love! Don't use an ugly plastic coolant catch, and don't zip tie, tape or bailing wire an otherwise classy bottle to your rig. Bolt this iconic whiskey bottle holder to your car, truck, rock crawler or off-roader and drop jaws when you pop the hood, if you even have one.
Let customers speak for us
Hi
Nice part!!
Could be better and would pay more if it had drill bushings installed.
Pilot hole and finished size.
Would get all the holes accurately located.
Great product and only $20 with free shipping !!!!! Worked awesome when installing my new ARB locker in my Dana 60.
Received as a precious b-day gift from my wonderful old lady, was kinda nervous and unsure if I was up to the task or what would even come out of it. Started my welding and fabrication journey two months back, self taught from the ground up and having little to no experience, this was a super fun practice exercise to bang out with SMAW, running 7014’s. MIG or flux-core would have been far easier for my current skill level but stick was a fun challenge to dial in settings on thin material and see what I could grind out. Folding was cake; use a vice and hand strength and you’ll get er cranked up in no time. No need to bevel or grind edges to achieve a clean fit-up with the precise laser cut pieces. CNA is frigggin legit and worth every penny!! Also note, the set I received was closer to 12ga than 11ga, but now we’re literally splitting hairs. Had such a blast that I couldn’t help but order a second set before I was even done welding this one up. You receive two pieces of raw unfinished steel, zero directions, and the pathways of how to approach transforming them are infinite. Shout out to my old lady, RabbitGoddess, for hooking me up with this sweet and thoughtful b-day gift!! Nuff said, happy smelting.Love and viiibes from your favorite metallic booger bandit!!#arcsarelitty#arcsrus#boneofarc
Easy installation. Comes with instructions you almost don't need them. Heavy duty, has lot's of protection for the bottle and it's not bulky fits almost anywhere. Worth the price. Highly recommend it
I prefer buying the practice kits that allow the most repition. 24 filets is not bad for the size and price point.
Just wanted to get something to practice welding on and liked the idea of a holder for my mig handle. Well, I love this thing. Obviously I’m not the best welder or even a good one. But I love the way this turned out. Checking out their website to buy more kits.
Just more material sourced for when I am ready to learn (or Relearn) a welding process I haven't done for 50 years! What we know today as TIG welding used to be called Heli-Arc welding. A bit of the process has changed and so have I in the last 50 years!Once I practice on other items I can weld together and improve enough to share my work with others this will make a perfect small project with which I can showcase my polished up skills at TIG welding!I wanted something more than pieces of scrap metal to show to potential customers! This will work perfectly!
Compared to the other "typical" MIG torch holder I have, this one handles the weight of the torch and its cord. No tip-overs so far in about 16 hours of use. Magnet is stronger than other holders, which helps. Instructions are just a diagram sheet. If you want their cutout logo to read correctly from the outside, watch which way you bend the top to 45 degrees. It took about 20 minutes to assemble and grind welds.
Great quality. Fun little welding project.
I ordered this for my 1952 GMC truck build with 454 BBC. I didn't have a good area to mount this close to the radiator so had to fabricate an extension. This product is well built and includes detailed instructions. The only thing that wasn't included in the kit was a JD bottle and mounting screws. Looks and works great!
Work how they should
Changed welding speeds & volts,2 different welding machines. And metal thickness as well great kit to sharping skills, but getting much better than last year starting.
I ordered the jack daniels coolant holder and let me start off by saying WOW.. the quality of the product is probably better than my car. This thing is solid and fits the bottle like a glove. I happen to drop the nut and grommet and could not find them. So I wrote to their customer service and they responded within 20 minutes and helped resolve the situation by sending me the lost parts free of charge. Companies like this are hard to find now a days.
Made in the USA with USA Materials... Because it Matters!
Save time sourcing, cutting, and prepping practice materials. High quality products at an affordable cost! Get straight to the Good Stuff... Welding!
