Jeepster Subframe Link Mounts - 3 Link Front - 4 Link Rear

Building a linked suspension from individual brackets can be a time-consuming process. Each bracket must be carefully measured, positioned, and welded independently, increasing fabrication time and creating opportunities for alignment errors. Traditional lower link brackets also leave a recessed pocket between the front and rear mounts that can become a hang-up point on rocks.

The Jeepster Subframe Link Mounts were engineered as a complete frame-side suspension system rather than a collection of individual brackets. Designed for a front 3-link and rear 4-link suspension, the assembly integrates the front lower link mounts, upper link mount, and rear lower link mounts into one weld-on structure.

By tying the lower mounts together, the design creates a smooth, continuous underside that complements a flat-belly chassis and helps the vehicle slide over obstacles instead of catching on exposed suspension brackets.

Because the critical bracket locations are built into one assembly, much of the measuring and layout required when installing individual suspension brackets is eliminated. Simply align the driver and passenger assemblies on the frame rails and weld them into place, providing consistent suspension geometry while significantly reducing fabrication time.

The integrated design also includes provisions for the CNA GM Transmission Mount (sold separately), allowing the transmission crossmember to be added later without modifying the suspension mounts.

The standard production version is configured for a driver-side upper front 3-link, matching the suspension used on our Junkyard Jeepster. A passenger-side upper 3-link configuration is available upon request for builders using a different drivetrain or suspension layout.

Manufactured from CNC laser-cut 3/16" HRPO steel, these mounts are designed specifically for the CNA Jeepster Frame and custom 2x4 boxed frames, providing a strong foundation for a high-clearance linked suspension system.

Key Features:  

• Designed for front 3-link and rear 4-link suspension systems 
• Standard driver-side upper 3-link configuration 
  • Passenger-side upper 3-link available upon request 
• Integrated front and rear frame-side suspension mounts
• Eliminates much of the measuring and layout required with individual brackets 
• Creates a smooth underside for improved flat-belly clearance 
• Reduces hang-up points commonly found between separate lower link brackets 
• Integrated provisions for the CNA GM Transmission Mount (sold separately) 
• CNC laser-cut from 3/16" HRPO steel 
• Designed for 2x4 boxed frame rails 
• Designed, built, and trail tested on the Junkyard Jeepster 
  

Need a passenger-side upper 3-link?
Our standard production version is configured for a driver-side upper link, but we can manufacture a passenger-side version to match your build. Contact us before ordering.